cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
147
Flag Post
HP Recommended

Sprocket printing pink/purple

Sprocket
macOS 10.12 Sierra

My daughters sprocket is printing pink/purple.   We’ve tried resetting it but hasn’t worked.  Please help. 

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
14,581 14,559 933 933
Message 2 of 2
107
Flag Post
HP Recommended

Sprocket printing pink/purple

@Bulldogmom02

 

Please ensure you are using genuine HP ZINK photo paper

 

HP recommends using genuine HP ZINK Sprocket Photo Paper for best results. HP cannot guarantee the quality or reliability of non-HP photo paper.

 

Next I suggest you upgrade the printer firmware

 

  1. Make sure the Sprocket is on and your mobile device is connected to the Internet.

  2. On your mobile device, open the HP sprocket app.

  3. Tap the Menu icon , and then tap sprocket.

  4. Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

  5. Under the Status section, locate Battery.

    • If the battery charge is 25% or higher, continue with these steps.

    • If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.

  6. In Printer Settings, look for a firmware upgrade.

    • If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    • If a firmware upgrade option does not display, the firmware is up-to-date.

Send a print job. If the print quality is still unacceptable, continue to the next step.

 

If the issue persists you can clean the Sprocket paper path rollers

  1. Remove the Paper Cover, and then remove any photo paper from the input tray.

  2. Check the photo paper and remove any severely bent, wrinkled, or torn photo paper from the stack.

  3. Reload the photo paper with the colored card on the bottom of the stack with the barcode facing down.

  4. Replace the Paper Cover, and then wait while the Sprocket detects and cleans the paper path rollers with the colored card.

    If the Sprocket does not automatically detect the colored card, send a print job to manually start the cleaning process.

You can also follow the instructions in this Link: https://support.hp.com/in-en/document/c05660842

 

Keep me posted how it goes 😊

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

KrazyToad
I Am An HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation