cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Mags68
New member
1 0 0 0
Message 1 of 2
118
Flag Post
HP Recommended

Wont charge

Hello, I had a sprocket printer for Christmas last year, maybe used it half a dozen times, last time in march, went to use it yesterday and put it on charge, red light comes for around 10 mins and then nothing, cant get it to switch on,

Any ideas?

Thanks

1 REPLY 1
HP Support Agent
HP Support Agent
11,534 11,525 557 588
Message 2 of 2
83
Flag Post
HP Recommended

Wont charge

@Mags68

 

Try charging the sprocket in a different wall outlet.

Try using a different cable.

 

If the printer does not turn on when you press the Power button, reset the printer with a straight pin to clear any errors.

  1. Turn on the printer.

  2. Locate the Reset button near the charging port.

    Locating the reset button

  3. Gently insert the straight pin into the reset button access point, and then press the Reset button for 3 seconds.

    The printer resets and turns off.

  4. Turn on the printer.

Refer to this document: https://support.hp.com/in-en/product/hp-sprocket-photo-printer/12635221/document/c05241268 for Frequently Asked Questions.

 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

 

Thank you for joining the HP Community.

Have a great day!

Cheers:)

Raj1788
I am an HP Employee 

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation