• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Be the first to explore and join the conversation on our brand-new Poly Support Community Blog, Click here It's live now!!
HP Recommended

MCU(RMX 2000 V7.0) Prefix as registered in the CMA 4000 was 2000,but i changed  it to 8000,after rebooting ,RMX 2000 has no responding,i had to power off the system,then it was ok.

 

check th log:

Category:General
Levle:Major
Code:MPL starup failure Authentication no received
Description:MPL failure - product activation indication was not received

 

what cause the  problem?what is MPL?

 

thank you very much.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Drifter,

 

There are chips inside each of the cards in an RMX (MPM, RTM IP, Controller) that contain the hardware information like the serial numbers, MAC addresses and the license key. The MPL failure message is caused by the chip in the control card not being able to communicate with the chip in the RTM IP card.

 

The cards in the RMX communicate internally via IP communication. Anytime you are changing something in the IP stack, the stack itself has to be rebooted. Occasionally, when the stack comes back up, there will be some issues communicating between the RTM IP card and the Control card via the internal VLAN.

 

It is uncommon, but it is not indicative of any hardware defects in your RMX, it is simply a consequence of the product's complexity and modularity.

 

Hope this helps.

View solution in original post

2 REPLIES 2
HP Recommended

Drifter,

 

There are chips inside each of the cards in an RMX (MPM, RTM IP, Controller) that contain the hardware information like the serial numbers, MAC addresses and the license key. The MPL failure message is caused by the chip in the control card not being able to communicate with the chip in the RTM IP card.

 

The cards in the RMX communicate internally via IP communication. Anytime you are changing something in the IP stack, the stack itself has to be rebooted. Occasionally, when the stack comes back up, there will be some issues communicating between the RTM IP card and the Control card via the internal VLAN.

 

It is uncommon, but it is not indicative of any hardware defects in your RMX, it is simply a consequence of the product's complexity and modularity.

 

Hope this helps.

HP Recommended

it is very helpful ,thank you !

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.