Create an account on the HP Community to personalize your profile and ask a question
01-20-2012 02:30 AM
I am having problems with a VBP ST, it was given to me to configure but none had the usernames and passwords or IP’s
I then, used a paperclip and pressed the erase button in front three times and the system rebooted fine, I could then ping 192.168.1.1 on port 1 from my laptop but I could not connect to it from my IE.
I consoled into the VBP but need a username and password, root and default does not work as per documentation, also while in console mode I can see and error when I try to connect from IE please see below.
HTTP_access_deniedIN=eth0 OUT= MAC=00:90:fb:34:7c:c2:88:ae:1d:b4:83:1b:08:00 src=192.168.1.2 DST=192.168.1.1 LEN=60 TOS=0x00 PREC=0x00 TTL=128 ID=2478 DF PROTO=TCP SPT=52261 DPT=80 WINDOW=8192 RES=0x00 SYN URGP=0
HTTP_access_deniedIN=eth0 OUT= MAC=00:90:fb:34:7c:c2:88:ae:1d:b4:83:1b:08:00 src=192.168.1.2 DST=192.168.1.1 LEN=60 TOS=0x00 PREC=0x00 TTL=128 ID=2482 DF PROTO=TCP SPT=52261 DPT=80 WINDOW=8192 RES=0x00 SYN URGP=0
HTTP_access_deniedIN=eth0 OUT= MAC=00:90:fb:34:7c:c2:88:ae:1d:b4:83:1b:08:00 src=192.168.1.2 DST=192.168.1.1 LEN=56 TOS=0x00 PREC=0x00 TTL=128 ID=2483 DF PROTO=TCP SPT=52261 DPT=80 WINDOW=8192 RES=0x00 SYN URGP=0
NB: Also if known please provide admin username and password for console please.
01-23-2012 06:12 AM
This issue typically pops up on ST boxes that have been converted from E boxes. Because the port assignment is backwards on an E vs an ST. So to fix it, you can log in through the console using the following credentials:
User: - root
Pass: - @#$%^&*!()
(shift + 2345678190)
Once you are there, running these three commands should reset the HTTP listen settings in the firewall:
Then reboot the VBP. When it comes back up, it should be listening on port 80 and you should be able to log in.
02-02-2012 10:03 AM
I am having the same problem as far as logging on, but my issue is that the machine (5300-E ver. 11.2.3) is just beeping. This is even after pushing the erase button 3 times. Also, pressing the reset button as no effect. The machine just keeps on beeping, and nothing on the console access as well. Hope you can help.
02-02-2012 10:05 AM
If the unit is beeping then it is a hardware failure. The beeps you are hearing are a motherboard error code indicating a hardware failure of some kind, so the unit will have to RMAd as none of the internal components are field servicable.