-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
- HP Community
- Poly Headsets
- DECT Wireless Headsets
- Polycom 8240 UC flashing

Create an account on the HP Community to personalize your profile and ask a question

08-04-2021 03:41 PM
I have a new 8240 UC. The DECT USB adapter should flash blue when on a call (and it does). But it also flashes occasionally (sometimes often) when I'm not on a call and the headset is on the base. The LED light on the headset flashes at the same time. I could see an occasional "phoning home" to check the connection, but sometimes this will happen every few minutes or practically constantly for a while. Or it may go hours without it happening. What does this mean?
This unit is a warranty replacement for another 8240 UC which did the same thing, and would also disconnect when on a call, and then reconnect on its own. I haven't had this one long enough to know if it is going to have connection issues when I'm on a call, but I'm a little paranoid.
Has this happened to anyone else?
Thanks,
Faye
Solved! Go to Solution.
Accepted Solutions

08-05-2021 02:51 AM
The behaviour on the USB adapter's LED is the "audio sensing" feature. This is used to auto establish the link between headset and dongle to play audio. When D200 is set as the default playback device it plays all general audio from the OS. So short sounds like mail messages or windows notification messages play but as DECT link is not fast enough to establish for short sounds you don't hear the short sound but will just see the blue blinking. Audio sensing can be disabled in Poly Hub application but then you would need to manually open the link if you want to listen to audio on the pc. For more info/support please contact our support via headset.helpline@poly.com

08-05-2021 02:51 AM
The behaviour on the USB adapter's LED is the "audio sensing" feature. This is used to auto establish the link between headset and dongle to play audio. When D200 is set as the default playback device it plays all general audio from the OS. So short sounds like mail messages or windows notification messages play but as DECT link is not fast enough to establish for short sounds you don't hear the short sound but will just see the blue blinking. Audio sensing can be disabled in Poly Hub application but then you would need to manually open the link if you want to listen to audio on the pc. For more info/support please contact our support via headset.helpline@poly.com
Didn't find what you were looking for? Ask the community