-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
Create an account on the HP Community to personalize your profile and ask a question
07-13-2016 01:12 AM
Hi,
we have a problem in our L26500 latex printer.
Error code 50.1:11
we change new OMAS, Sausalito PCA and the cable between these board.
still the problem is existing ! what will be the cause of this problem.
Solved! Go to Solution.
Accepted Solutions
07-21-2016 06:43 AM
Hi,
I solved this issue by changing OMAS sensor.
before that i checked OMAS board and Sausalito Board and the inter connection cables,
but it didn't work.
Thank you.
07-03-2019 07:32 PM
I have same problem. I fix it.
1) Check white cable back on printer under Ethernet cable. Make sure it is nicely connected to PCB.
2) Check other end.
3) 99 % problem in white cable connection
If you get above error printer would not load media.It keep rolling out.
Also when you start printer it says hot surface 50.1.11 error shutdown.
I check OMAS & circuit board from entering the Service Utilities Menu. All pass.
In my case white cable connection which is on board was broken. I replace OMAS Controller Q6651-80059 & everything good now.
I recommend do not install black cover which is on top of Ethernet cover. It damage OMAS Controller Q6651-80059 & white cable.
Didn't find what you were looking for? Ask the community