-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- Polycom 650 SIP Registration

Create an account on the HP Community to personalize your profile and ask a question

06-29-2011 10:46 AM
My company uses the Polycom SoundPoint 650 and we are looking at whether we can hook it up directly with a VoIP service called Gradwell. They told us the following:
"You can connect direct to our account with SIP registration. As long as the poly coms can have the details amended to SIP extension and password for our service."
I am trying to figure out whether the Polycom 650 can do what they are asking. Can anyone tell me if this is possible with the 650? I tried looking at the user guide but didn't see anything about setting an SIP extension or password.
Thanks!
Gary
Solved! Go to Solution.
Accepted Solutions

06-29-2011 11:42 PM
Hi GaryDenver,
Please also check out QT 44011 from the Quick Tip section of our website. This has instructions for a basic SIP registration, configured from the phone's web interface. As per their knowledgebase, Gradwell should have provided pertinent SIP account information in your welcome email; this will be needed to complete the registration. This article on Gradwell's knowledgebase discusses settings for the IP 320; similar steps can be applied to other Polycom IP phones.
-James
06-29-2011 03:49 PM
Hello GaryDenver,
Configuration on the Polycom® Phone Menu:
• Press the Menu Button
• Choose (3) Settings
• Choose (2) Advanced
• Password is 456
• Choose (1) Admin Settings
• Choose (2) SIP Configuration
• Select Server and add the IP Address or FQDN of the SIP Provider
Confirm this selection and scroll down to Line1:
• Enter a Display Name
• Add the SIP Extension/Username as the Address
• Add the SIP Extension/Username as the Auth User ID
• Add the Password
• Optional add a Label that will be displayed next to the Line Key
• Press exit until the Prompt comes to save the Settings and the Phone will reboot after this
Configuration via the Polycom® Phone Web interface:
Browse to the Phones Web Server
Username: Polycom
Password: 456
Line Settings:
· Add the SIP Extension/Username as the Address
· Add SIP Extension/Username as the Auth User ID
· Add the Auth Password
Sip Server Settings:
Just add the IP Address or FQDN of the SIP Provider in the Server 1 Selection
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN

06-29-2011 11:42 PM
Hi GaryDenver,
Please also check out QT 44011 from the Quick Tip section of our website. This has instructions for a basic SIP registration, configured from the phone's web interface. As per their knowledgebase, Gradwell should have provided pertinent SIP account information in your welcome email; this will be needed to complete the registration. This article on Gradwell's knowledgebase discusses settings for the IP 320; similar steps can be applied to other Polycom IP phones.
-James
Didn't find what you were looking for? Ask the community