Polycom CX600 and cisco voice vlan

Anonymous · ‎12-09-2011

so we have our cisco network with 2960 switches, POE.

interfaces have the regular pc vlan and also the voice vlan 900.

for some reason when I plug let's say a SoundPoint IP550 all goes well, cisco switch puts the phone on vlan 900 but it just doesn't seem to work with the CX600.

any ways to make the CX600 works with voice vlan or it's a lost cause?

thanks.

SteffenBaierUK · ‎12-09-2011

Hello pamiran76,

welcome to the Polycom Community.

Have a read => here <= as the Phones use LLDP

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN

Anonymous · ‎04-02-2014

Hi,

I'm new to this community. My issue is,

We're using Polycom CX600 and Polycom VVX300 together in the same LAN. VLAN imformations are as follows.

VLAN 30 - DATA

VLAN 31 - DATA

VLAN 40 - Voice

VLAN 41 - Voice

We've configured four DHCP scopes in the Cisco 4507 which is the core switch related to above VLANS. my issue is, VVX300 takes correct VLAN which is 40 and 41. but CX600 doesn't take the correct VLAN. I tried many times but the problem is the same. So I'd like to know the step by step configuration for Cisco switches for LLDP-MED.

Thank you

Create an account on the HP Community to personalize your profile and ask a question