Create an account on the HP Community to personalize your profile and ask a question
10-05-2016 09:25 AM
Recently we have been manually configuring our polycom VVX600s and pointing them to our provisioning server. We are using Infoblox as our DHCP Server and putting in
Option 66/161/160 ftp://pftp:Randompassword1234@10.0.0.0(ipaddress of FTP Server) the phones aren't seeing this
We have option 42 for our time server configured as our DC for time and the phones still don't have the correct time.
Option 3 we have the web server FQDN configured as the web internal fqdn but as hex servername.domain.domain.com
Option 120 is our SBA converted into hexadecimal Servername.domain.domain.com
Option 4 web server port 443 converted
Option 5 /certprov/certprovisioningservice.svc converted to hex
Even after all of these configurations the phones aren't seeing the options. We have checked the firewall to make sure its not blocking FTP but that's not the case. The phones aren't even seeing the options. We have also checked inside of the phone in the web gui to see what option it's reading. We have moved and changed the options in the phones to see if they can read 161, 160, or 66 and none have seemed to work. Not sure what could be causing this. We have also each once checked the options over and have cleared and reboot the phones. When we manually provision the phones they reach the FTP server no problem.
UC Software Version 188.8.131.52556
Updater Version 5.7.18267
Sonus SBC 1000/2000
10-05-2016 09:32 AM
welcome to the Polycom Community.
It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release.
Please also include if you are using a SIP server or a LYNC / Skype for Business server.
This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.
The above is also stated in the "Read First"
Therefore the Polycom VoIP FAQ contains this post here:
Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here
Use a spanned / mirrored port and use this:
Aug 24, 2015 Question:What basic network data is send and received by a Polycom phone?
Resolution: Please check this post => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Notice: This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN