-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
-
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- Re: VVX D230 Second Handset will not ring or receive call

Create an account on the HP Community to personalize your profile and ask a question

10-03-2022 12:16 PM
We have a second handset successfully registered with the base. The handset indicates on the display that it is sharing the same extension. A call can be placed by the second handset successfully, and the receiving device will indicate it is coming from the correct extension.
However, it will not ring, or receive a call that is placed to the extension that is configured for the base.
In sum, the second handset will place a call from the extension, but it will not receive a call placed to the extension.
I tried resetting the second handset and re-registering it to no improvement.
Thanks in advance for any information that can be provided.
Solved! Go to Solution.
Accepted Solutions
10-04-2022 12:59 AM
Hello @Spirit Rock IT ,
Welcome to the Poly Community.
Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure a reply (not Edit!) provides as much detail as possible
Please ensure you familiarise yourself with the FAQ’s listed in my signature for your convenience.
For example with D230 Instructions:
Oct 7, 2011 Question: Can I register or is my Poly Phone compatible with a “XYZ” SIP Server?
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
10-04-2022 12:59 AM
Hello @Spirit Rock IT ,
Welcome to the Poly Community.
Both the communities Must Read First or Read 1st and if available the FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
Unfortunately, your post fell a bit short of the above-explained requirements and we kindly ask you, therefore, to ensure to read these sections and ensure a reply (not Edit!) provides as much detail as possible
Please ensure you familiarise yourself with the FAQ’s listed in my signature for your convenience.
For example with D230 Instructions:
Oct 7, 2011 Question: Can I register or is my Poly Phone compatible with a “XYZ” SIP Server?
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN

10-04-2022 09:37 AM
Sorry for not understanding the expected decorum in this forum. I will keep it in mind if I post again in the future. I was able to resolve this issue by other means and will close this ticket.
Thanks, and best regards.
10-04-2022 09:44 AM
Hello @Spirit Rock IT ,
No ticket was raised as this is a simple forum so no ticket to close. If you want to detail how or what you fixed it may help others when finding this post.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Didn't find what you were looking for? Ask the community