laserjet m17w Attention (warning) light keeps flashing after unboxing

[KongL]

After the laserjet m17w is unboxed and installed, the attention (warning) light keeps flashing. I just bought it and removed all the orange tape and accessories from the printer and the toner cartridge according to the manual.

[praveen196]

@KongL Welcome to HP Community!

I understand that the Attention light keeps flashing for the HP laserjet m17w printer.

Do not worry. I will try to fix the issue.

Please perform the hard reset and check for the result.

1. Turn the printer on, if it is not already on. 

2. Wait until the printer is idle and silent before you continue. 

3. With the printer turned on, disconnect the power cord from the rear of the printer. 

4. Unplug the power cord from the wall outlet. 

5. Wait at least 60 seconds. 

6. Plug the power cord back into the wall outlet. 

7. Reconnect the power cord to the rear of the printer. 

8. Turn on the printer, if it does not automatically turn on. 

9. Wait until the printer is idle and silent before you proceed 

Please refer to the below link to troubleshoot the HP LaserJet Pro M14-M17 Printer Series - Blinking Lights.

https://support.hp.com/us-en/product/hp-laserjet-pro-m14-m17-printer-series/16647043/document/c05851...

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!