Create an account on the HP Community to personalize your profile and ask a question
11-05-2018 01:41 PM
Can you tell me how does RM 10.4 and DMA 9.0.1 know when to use a video or a phone license.?
If I have a gs device and I click the button to place a phone call will it use a video or a phone license for this device.?
So here is what I am thinking..
It seems that the voip cards would be considered phone sip devices and not video sip devices, and anytime a GS device changed the call switch from video to phone that also would be a phone call.
With RM 10.4 that separates video licenses and phone licenses that creates an issue for us because we are not licensed for phone.
Everything before this upgrade to 10.4 had phone and video using the same licensing pool.
What I have found out is the GS and HDX devices can place calls all day long, but every time I place a voip card call we get the fast busy tone.
I also do not complete phone calls through the gs device if I switch the call from video to phone.
11-05-2018 02:28 PM
welcome to the Polycom Community.
Most of the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
- Provide the exact Software Version of your Phone
- Provide the Phone Model
- Provide the Call Platform (aka openSIP,Skype for Business Online, Skype for Business on Premise, Lync)
- Additional Polycom Infrastructure (RPRM,PDMS or BToE)
- If applicable provide a backup of the phone in question
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup
- If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
- If possible provide the MAC Address or Serial of the device
- Provide details if the issue is a day 1 issue or only happened after an upgrade or any other relevant details
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition other details allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Notice: This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your support channels.
Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN