• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

Greetings,

First time posting.  I have a Pavilion dv7-1135nr laptop.  After I shutdown, the three lights blink together, unless I unplug from the wall.

 

Any Ideas?

 

Batt appears to be good, when plugged in, batt shows 99%, not charging.

 

Thanks,

Brad

5 REPLIES 5
HP Recommended

Hi,

 

This may be worth trying as the battery should still show as charging at 99%.

 

First of all, shutdown the notebook, unplug the AC Adapter unplugged, remove the battery, and then hold down the Power button for a full minute.

 

Now, plug in the AC Adapter and start the PC without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and theMicrosoft ACPI Compliant Control Method Battery and selectUninstall - do not uninstall anything else here.  When the uninstall is complete, shut the PC down, unplug the AC Adapter, re-insert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shutdown the PC again.  Now plug in the AC Adapter ( with the battery still inserted ) and start the PC to see if the battery now charges fully and whether the blinking LEDs have stopped when you shutdown.

 

Best wishes,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Well, I tried the suggestion, but I still get the blinking light when it gets to 99%.  Charges fine up to that point.

Any other ideas?

 

Bad Battery?

 

Thanks,

Brad

HP Recommended

Hi Brad,

 

If you have HP Support Assistant installed, there is a utility contained in this to run a test on the battery.  Details are on the following link.

 

http://support.hp.com/us-en/document/c00821536

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Yep,  coming back as Replace.

 

 

Thanks all!

 

Brad

HP Recommended

Hi Brad,

 

You're welcome.  Atleast you know what the problem is.

 

All the best,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.