Printer prints half the page and cartridge light come on.

[BuGeKe]

Recently, my HP Deskjet 2320 prints half sometimes almost 1/10 of a page. When I launch a print from my window 10 (64-bit), the printing stars normally and stops after a while only to light up the colour ink cartridge lights.

It's actually a new cartridge I just got and has been printing with it for a short while. There's still a lot of ink according to the HP AMART DC

[Gaya1239]

Hi @BuGeKe,

Welcome to the HP Support Community

I understand you are facing a print quality issue with your HP Deskjet 2320 Printer prints half the page and the cartridge light comes on. . Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• Are you using genuine HP ink cartridges?
• Does the copy print out the same way? 
• What's the application you are trying to print from? 
• Have you tried printing from a different application or device? 

While you respond to that, let's print a Print Quality Diagnostic page -Post the Print Quality Diagnostic page here so we can help you further.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove the USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till the warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware. 
• follow the troubleshooting steps HP DeskJet 2130, 2300 Printers - Black or Color Ink Not Printing, Other Print Quality Issues

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!