• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended

I have run all of the diagnostics (printer status report, printhead cleaning, alignment, etc) and on all of them the colors print fine, but the black won't print AT ALL. I have also replaced the cartridge.

 

Is it the printhead? How can I get this resolved so I can print again??????

 

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi folks

For Black not printing, check out the links below. If the steps mentioned don't solve the issue, please let me know...

 

 

Thanks

Ciara

 

 

Black not printing

http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/Black-not-printing/m-p/2926025

 

Troubleshooting print quality issues for the OJ 7000

http://support.hp.com/us-en/document/c01758227

 

I am speaking for myself and not for HP. Twitter: @Ciara_B_27

View solution in original post

18 REPLIES 18
HP Recommended

I have tthe exact same problem. Printer goes through all the motions but comes out blank. A bit frustrating,especially when used for your business.

HP Recommended

I have the same problem. All colors work fine, just no black. Have replaced black cartridge twice and upgraded printer driver. Still no black.

 

HP, please help.

HP Recommended

This is a serious problem HP. I've been using your printers for 10 years now. This printer would be great without this black ink issue.  Please help. I use it to make iron-on transfers and am stuck. I've had this happen with this printer before and then the problem inexplicably fixed itself. It's doing it to me again today.

HP Recommended

A work-around solution I have found to work for me is... Select premium hp photo paper and select maximum dpi in the settings menu. This works for me (although not the most cost effective solution in most cases).

HP Recommended

Same problem here.  This is actually my second printer of this model--only because it was "free" after the first one broke from a different problem--but now I think I've learned my lesson.  VERY frustrating, it just printed properly yesterday morning, and now, no black.  All cartridges have ink, almost full, but I already knew that wasn't the issue.  There is definitely some defect with this model, aside from all the gyrations it does before it will spit out your printed page.  What a shame, HP usually makes a reliable product, we always get their computers.  I wish they'd go back to making the 1220 (or was it 1120?).  THAT was a great wide format printer, with rear access so you could feed just about any kind of paper in it.  I miss that one.

They should spend time correcting this problem instead of setting up format options for a discussion forum post. . . . . . . . . . .

PS: I once saw a fix where if you left the black cartridge out for 24 hours & put it back, it will work.  That DID work one time for me, but not today.  Gonna try again though.  The other suggested work-around solution did not work for me.

HP Recommended

I am having the same problem too.  Even purchased a new print head - and trying brand new cartridges, only to have them work for a few days and then once again no black print.  I have always purchased HP printers, but this will be my last.  Has anyone found a solution yet?    And like someone else said - I miss the 1220 - that was a great work horse printer!

Mistie

HP Recommended

Is someone from HP going to address this issue?

HP Recommended

Hi; the OJ 7000 uses 920 cartridges and print heads.  From your description it sounds like you have an ink system error. 

 

An 'Ink System Failure' or '0x... ' error message displays on the printer control panel. The exact text of these error messages varies by printer, but they are usually preceded by the word 'Error .'
The steps to resolve this issue depend on the error code that displays on the product control panel with the ‘Ink System Failure’ message. Look for the section below that addresses your particular issue, and then review the solutions in that section.
This step by step instruction should resolve the issue (please expand the "+" signs to see the specific error and remediation.
 
Hope that helps!
 
HP Recommended

 

Other colors fine; black won't print....second new black cartridge in now.

Need it for work!

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.