HP CM2320 PCL XL error , internalerror 0x50 on office documents

[crussell1nc]

HP CM2320 will not print office documents. Instead an error report prints as follows...

PCL XL error

               Subsystem:    TEXT

               Error:                InternalError 0x50

                Operator:         BeginChar

                Position:        46

How can I get this printer to work?

[SyntacRSC]

I have the same problem on my CM2320fxi - if anyone has a solution I'd be thrilled to know about it - thanks!

[Texheim · Accepted solution]

Print a Net Work Configuration Page before performing the following as this will reset your machine to factory defaults. You need to power off the machine. With the machine powered off press and hold the Right Arrow button and the X (cancel) button.  With both of these buttons pressed at the same time power on the machine and release the buttons when you see Permanent storage init. displayed.

This worked for me after unistalling and reinstalling the machine several times with no results.

[younesdfw]

How can I have my Laser jet 1312 NFI working again, I dowload the drivers thousand time but won't print any thing but the error below

PCL XL error

               Subsystem:    TEXT

               Error:                InternalError 0x50

                Operator:         BeginChar

                Position:        46

 What I need to do ??

[irasemamarcial]

Thanks a lot!!! I was getting so frustrated with my printer.. until I read your post. Lifesaver

[HP_ML]

This solution worked for me too. Thank you.

[EALG]

my printer gives me an erro of:

PCL XL error

               SUbsystem:     TEXT

                ERRO:            InternalError 0x50

                Operator:        Beginchar

                Position:          3532

how can i solve this problem?please help me

[IGH237]

---

@crussell1nc wrote:

HP CM2320 will not print office documents. Instead an error report prints as follows...

PCL XL error

               Subsystem:    TEXT

               Error:                InternalError 0x50

                Operator:         BeginChar

                Position:        46

How can I get this printer to work?

---

[AlwaysNeon]

Sounds like you are receiving a printing error with this laserjet. To start I would like you to remove the software you currently have and add the correct version of the printer specific software and/or try installing the PL6 driver. I am going to provide a link to both below :

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...

http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...

Try that and respond back here and let me know how it goes! 

I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here! 

-Spencer 

[Sheyx-Shamil]

Please help me. How can i repear my Printer? Please reply my email : [Personal Information Removed]