MS Word not responding

[Ineffable03]

When I try to print in the MS Word the printer doesn't respond and the printer doesn't have the error message. the connection is good it's just when I use the MS word it doesn't work

[Irfan_06]

Hi @Ineffable03,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with printing from MS word on your Printer.

A) Please follow the steps below to perform a power drain.

 1) Unplug the power cord from the printer & wall.

2) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

3) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

4) Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Power on the printer

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) If the issue still persists, C) If the issue still persists, uninstall the printer software by following the steps from this link and restart the devices.

D)  Install the printer software by clicking on the link again and let me know if that resolves the issue.

Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support