get flat files from sp77540.exe (NIC driver)

[HvemVet]

There are "new" drivers for Intel I219LM/V Gigabit Ethernet fixes the BIOS LAN/WLAN switch bug.

Unfortuantely when I either run SoftwareDownloadmanager or extract it by downloading it from the webpage i end up with a setup.exe and this I can not extract further

http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_176068_1&swEnvOid=4158

The setup.exe seem to be a a Intel package. The cva says that silent install is setup.exe /S /A /S

However I have not found an extract only command.

Any ideas how I can get around this? I need the inf. etc. for my SCCM 2012R2 OSD Driver Package.

[Paul_Tikkanen · Accepted solution]

Hi:

Use the free file utility 7-Zip to get what you want.

http://www.7-zip.org/

After you install 7-Zip, right click on sp77540.

Have 7-Zip Extract to: and let it extract the file into its folder name (sp77540).

Then run it again on the setup exe file you see inside that folder and it will extract.

You'll get a checksum error, but you will be able to explore the driver folders for the inf file you need.

I just ran it so I know it will work.

[HvemVet]

Thanks! That worked. I tried the same with PeaZip ealier and that did not work som well. I am glad I am not stuck on this problem anymore.

[Paul_Tikkanen]

You're very welcome.

7-Zip has never failed me.