08-19-2016 04:36 AM
I have problems with HP ProOne 400 G2 20-in Non-Touch AiO. If activboard is plugged in via usb, there is almost no way to normal reboot or bootup a system. Pc starts and there is blank screen. Three lights on keyboard blinks up like pc starts but it repeats like every 30 seconds untill i pull out usb cable connected to activboard.
After usb disconnection there is no problem with boot. I have tried on all usb ports, but there is same problem.
I have disabled Securebood, fastboot, disabled usb boot, and another settings, without any changes in problem.
Bios is the latest,
C:\Users\user>wmic bios get smbiosbiosversion
N13 Ver. 02.07
All drivers are latest.
I also have tried with older products (HP/Lenovo/Standard PC). These products have no issues with activboard.
I guess there is problem with BIOS, it seems system doesnt boot up to POST. There is no POST signal (HP Logo) untill i disconnect activboard. Another usb peripherals works without no issue.
Activboard system is promethean Abv378 PRo
08-21-2016 06:29 AM
08-21-2016 06:31 AM
It happens on all g2 proone g2 computers. On g1 there is no problems.
08-26-2016 12:18 PM
Hi there @ IzidorS,
Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel.
I understand from your post that you have an issue with your HP ProOne 400 G2 20-inch Touch All-in-One PC and promethean activboard.
I would recommend you contact our HP commercial Support by clicking on the below link:
(1) Once the support page opens please select the country in which you're located. Next, enter your HP model number on the right.
(2) Next, choose the 'Contact Support' tab at the top and scroll down to the bottom of the 'HP Support- Contact' page to fill out the form provided with your contact information.
(3) Once completed click the 'Show Options' icon on the bottom right.
(4) Lastly, scroll down to the bottom of the page and select 'Get phone number.' A case number and phone number will now populate for you.
Please keep me posted.
I work on behalf of HP
If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!
04-19-2017 07:48 AM
This is still an ongoing issue that has not been addressed properly. Our organization has ordered over 80 of these in the past few months and we need a solution. We have tried a new image, graphics driver updates, different BIOS revisions, BIOS settings, different cable adapters / gender changers and more. I have located multiple forums on this issue and other AiO desktops not working correctly when using a second monitor.
It not just one or two doing this. It is all of them. Even ones that we have had for a few months to the ones we just received today are doing this.
04-20-2017 12:52 PM
We have been fighting this issue also.
As of yestreday they finally have a fix for it
There is a Bios update that you have to do from Bios. It is not on website yet.
Also have to do firmware update also not on web page yet.
And Video Driver I got from HP tech support