-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Desktops (Archived)
- Enabling UEFI mode on SDD?

Create an account on the HP Community to personalize your profile and ask a question

03-28-2017 05:02 AM
Hi - I recently bought a 570-p075na. I swapped the 3TB HDD for a 500 GB SSD, but in order to install Windows onto it from my DVD I had to disable secure boot and enable legacy support. But when I re-disabled legacy support the machine didn't see the disk and wouldn't boot.
How can I disable legacy support and enable secure boot again?
Thanks
J.
03-29-2017 10:07 AM
Welcome to HP Support Forums. 🙂 I came across your post and would like to help.
I understand that you have an HP Pavilion Desktop - 570-p075na and you have replaced the HDD on it. You have disabled secure boot and enabled legacy support. But the PC does not boot from the disk. I read that you would like to disable legacy support and enable secure boot again. I'll do my best to help you with this case.
The Secure Boot is enabled by default on computers that were manufactured with Windows 10. If Secure Boot has been disabled, follow the steps to enable it: Using Secure Boot on a desktop computer.
NOTE: Please refer to instructions mentioned under "Using Secure Boot on a desktop computer."
I sincerely hope this fixes the issue. Feel free to let me know. Take care! 🙂
