• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
HP Recommended
Pavillion Desktop 510 p030
Microsoft Windows 10 (64-bit)

I need to upgrade my power supply and need to know the type of connectors needed for the DVD drive.  I purchased a Micro ATX power supply but it did not have the right connector for the Ultra Slim-tray SuperMulti DVD Burner(6c) in my HP 510 p030.  Any recommendations on a power supply that will have the correct connectors would be appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@RW_

 

 

I would like to take a moment to thank you for posting on the HP Support Forums. I understand that you would like to upgrade the power supply for your HP Pavilion Desktop - 510-p030 and would like to know what power supply will have the correct connectors for Ultra Slim-tray SuperMulti DVD Burner(6c) I'd like to help you with this case. 

 

I tried searching for the power supply but could only find 180W power supplies from HP for this model However, the DVD drive's power source would be a Slimline SATA DC power receptacle. DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p DC Current 5 VDC - 1000 mA typical, 1600 mA maximum

 

 

4 SATA from the above picture should be the one. 

Feel free to let me know if you have any questions. Cheers! 🙂

View solution in original post

2 REPLIES 2
HP Recommended

@RW_

 

 

I would like to take a moment to thank you for posting on the HP Support Forums. I understand that you would like to upgrade the power supply for your HP Pavilion Desktop - 510-p030 and would like to know what power supply will have the correct connectors for Ultra Slim-tray SuperMulti DVD Burner(6c) I'd like to help you with this case. 

 

I tried searching for the power supply but could only find 180W power supplies from HP for this model However, the DVD drive's power source would be a Slimline SATA DC power receptacle. DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p DC Current 5 VDC - 1000 mA typical, 1600 mA maximum

 

 

4 SATA from the above picture should be the one. 

Feel free to let me know if you have any questions. Cheers! 🙂

HP Recommended

that was the info I needed.  I was able to find a conversion for the connector a "6 Pin Slimline SATA 15 Pin SATA Power Cable" on amazon.

 

Thanks

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.