Question
Reply
 
Student
Posts: 1
Member Since: ‎04-09-2014
Message 1 of 3 (231 Views)

Upgrading video card, Computer stuck on black screen

[ Edited ]

I am replacing the video card in my friend's HP a5600f desktop. There is no onboard video on her model, and I replaced the psu to a 480W psu so she could use my old HIS 6400 Silence video card.

 

Once I place the card in and power on the computer, the fans turn on to full speed, but it never makes it to POST, and the fans never decrease to their normal speeds. I have tried the video card in my own computer, and it works fine, so I know that isn't the issue. I re-inserted the original card that it came with and it works fine once again, so i know it's not the mother board. I even cleared the CMOS by jumper, I haven't tried removing the battery yet. Is there just some incompatibility that won't allow these two to work with one another? I really can't figure it out for the life of me.

 

Video card: http://www.hisdigital.com/un/product2-675.shtml

 

Motherboard: http://support.hp.com/us-en/document/c00864946

Reply
0
Retired
Posts: 7,286
Member Since: ‎03-11-2014
Message 2 of 3 (176 Views)

Upgrading video card, Computer stuck on black screen

[ Edited ]

Hi franky1029,

 

Welcome to the HP Forums!

 

I have read your post on not being able to boot your friend's desktop after replacing the graphics card, and I would be happy to be of assistance! To begin, I need to ask you a few questions:

 

What is the Product and Model Number of the desktop?

Who is the manufacturer of the PSU? What is the BIOS on the desktop up to date? To find out, please follow this document on Updating the Bios.

 

Please re-post with the necessary information, and I will diligently follow up with you!

 

Regards

 

MechPilot
I work on behalf of HP



Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Dean
Posts: 6,443
Member Since: ‎09-28-2010
Message 3 of 3 (172 Views)

Re: Upgrading video card, Computer stuck on black screen

[ Edited ]

From what you said and did not say, I doubt you followed the manual's directions. See here

It states you must uninstall the previous graphic card driver. I would also recommend any associated software.

 

I am a volunteer. I am not an HP employee.
Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

Loaner: Envy Omen Windows 10 Home 64 4th Gen Intel(R) Core(TM) i7-4720HQ Processor + NVIDIA GeForce GTX 960M 2GB Discrete Graphics (8GB memory) 128GB SSD
Loaner: HP ENVY 8 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8Z87D, I7-4770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 500GB HD SSD
Custom Asus P8P77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z67, I7-2600k, 8GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
All Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation