-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Desktops
- Desktop Hardware and Upgrade Questions
- desktop computers

Create an account on the HP Community to personalize your profile and ask a question
02-11-2017 01:09 PM
Replace defective hard drive and possible upgrade to a better performing one that will not exeed the mother board limits
Solved! Go to Solution.
Accepted Solutions
02-11-2017 01:20 PM
This is what I could find regarding Specs for your PC: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02779493
The drive interface is SATA III, so any modern SATA drive of 1TB or smaller would work, and for maximum performance, I would suggest looking for a 7200rpm drive -- although they will cost a bit more.
Good Luck
I am a volunteer and I do not work for, nor represent, HP
02-11-2017 01:13 PM - edited 02-11-2017 01:27 PM
Because the HP6200 is circa 2011, I would strongly suggest the same size hard drive as the original, or a drive not to exceed 2Terabytes. The link above shows the standard harddrive configuration(s). There are 4 - SATA300 (SATAII), and 2 - SATA600 (SATAIII) headers Use the SATAIII port, as a 64mb cache of these drives will improve data transfer.
HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
02-11-2017 01:20 PM
This is what I could find regarding Specs for your PC: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02779493
The drive interface is SATA III, so any modern SATA drive of 1TB or smaller would work, and for maximum performance, I would suggest looking for a 7200rpm drive -- although they will cost a bit more.
Good Luck
I am a volunteer and I do not work for, nor represent, HP