• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
Elitedesk 800 G2
Microsoft Windows 10 (64-bit)

When setting up and replacing workstations I take the DP to VGA adapters, connecting both old screens, out of the old machines and place them into the new machine.  On first boot one of these screens will be wavy and hard to use.  I have ended up connecting one screen directly to the VGA port on the Motherboard but the most this does is move the wavy from one screen to the other.  If I remove the DP to VGA adaptors and use a DP to DVI or a direct DP connections everything is ok.  

 

I would like to keep using the DP to VGA adapter for at least one screen and the other can be direct connect VGA.

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.