12-05-2008 04:08 PM
Just received my IQ506 this week and have spent about 3 hours per night trying to get the Touchsmart software working, and in turn sorting out the underlying problem with the video adapter. The sequence thus far:
- booted up first time, went through thru usual setup steps, accepted EULA, set preferences, created admin act etc
- once booted to desktop, tried to select/run Touchsmart software
- error pops up: you must select the 'Aero' them to use Touchsmart (noticed this same issue when I reviewed the product in-store)
First Issue: 'Aero' is not available under my themes, just 'Vista Classic' and 'Vista Standard'.
- tested all video resolutions, theme choices, etc. No effect.
- did some research online, MS and HP sites, sounds like AERO has some serious video card requirements, so double checked my card version.
Second Issue: Video card should be Nvidia GeForce 9300M, but shows up as 'Standard VGA Graphics adapter'. Should have 256 MB of dedicated DDR RAM, with shared memory up to 2GB, but showed up as 14MB Total Video Memory, n/a for shared or dedicated video memory
- ran HP hardware diagnostic and other precursor steps in the warranty documentation (including the aforementioned searching across multiple sites), eventually called their tech support line
- first tech support wasn't even familiar with the product, kept asking if it was a desktop or laptop, had to try to explain the concept of an all-in-one integrated touchscreen PC. After walking her thru the above listed info, she suggested rebooting to the bios screen to confirm the video adapter (which is weird, as I've never seen that info in a bios window before). Several large updates were pending, so I told her I'd call back when I was back at the bios screen.
- 20 mins later, updates completed, back at the bios screen with, of course, no info on video hardware. Called tech support back, got someone much more informed about the product, informed me I had been talking to someone from the wrong department (yet routed thru the same IVR choices on the call system). Proceeded to walk me thru several diagnostic/recovery steps
- HP recovery manager: re-install the video adapter, reboot. No effect
- review of all installed programs and removal of EVERYTHING except the official apps bundled with the product, reboot. No effect.
- a few more look here, check their, read that back to me steps. Finally, advised to go to the disk image on the D drive and do a full recovery to factory default. ~1 hour restoration, reboot. No effect. Have to call it a night and get some sleep
I'm at the office at the moment, but thought I'd ask around the forums before I call back to night to see if anyone else has seen or heard of anything even remotely similar. So far seems to be a stumper, and I'm guessing I'll be stuck shipping the lemon back. Hoping against hope someone might have a lead or suggestion.
12-05-2008 05:07 PM
i'm not at all familiar with the first issue, however it might be worth downloading (that is if you already haven't done so) the latest HP drivers for your IQ506 and applying them;
As a side note, I didn't have any of these issues you described myself when I initially setup/installed the IQ508 that I have,...
12-05-2008 05:28 PM
12-06-2008 08:58 AM
12-15-2008 12:51 PM
Reinstall your graphics driver. Here is the download:
12-15-2008 01:11 PM
12-15-2008 05:53 PM
Regarding Aero, it is only enabled as an option of Vista thinks your computer can handle it by checking your Windows Experience Index (WEI). I have seen some machines where Vista "forgets" what your WEI score was and you have to update your score. You can do that by going to Control Panel then Performance Information and Tools and finally click "Update my score" just beneath your current score (my 804 has a WEI of 4.5).
Then you can go back to Personalization, Window Color and Appearance and finally choose "Windows Aero" for your color scheme.
I work for HP.
01-08-2009 09:01 PM
01-08-2009 10:02 PM
To Dash-10: no, there were no errors reported when installing the graphics driver, the hardware just wouldn't recognize the video card. Even after multiple restores of the entire operating system, it still only saw the graphics device as a 'Standard VGA Graphics Adapter'.
- Downloading or Updating Software and Drivers for HP Computers
- HP PCs - Sleep and Hibernate Issues (Windows 10, 8)
- HP PCs - Error Messages Display on a Black Screen during Startup or Boot (Windows 10, 8, 7)
- HP PCs - Error Messages Display on a Blue Screen during Startup or Boot (Windows 10, 8, 7)
- HP All-in-One PCs - Troubleshooting Touch Screen Issues (Windows 8)