• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
From questions to kudos — grow your reputation as a tech expert with HP Support! Click here to sign up.
Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
HP Recommended
Touchsmart 9100
iOS

I need to remove a BIOS password from a recently purchased used Touchsmart 9100.

The instructions are vague and they show the motherboard but they should have showed a picture of the jumper block with the pins shorted correctly to remove the BIOS password.

The jumper block is labeled E69 and there are 3 pins on the left and 3 on the right.

I have labeled them below as I see them and wondered if I need to take both jumper 1 (Pin 3 and Pin 5)  and Jumper 2  (pin 4 and Pin 6) off and then then where to put the jumper(s) for 5 seconds to remove the password.

 

Pin 1 None           Pin 2  None

Pin 3 Jumper 1   Pin 4    Jumper 2

Pin 5 Jumper 1   Pin 6    Jumper 2     E69 <--------[CMOS PW]

 

Thanks

Harold

Archived This topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.