Sudden power off immediately after power on

[Siddhartha1106]

I have a HP omen 15. When I try to turn on the laptop it's turning off immediately after startup. I checked the battery it's says calibration needed(20)  but I changed the battery recently. is there a problem with my battery and iam doing an extensive test so can I know what's the problem that's causing this but it's shutting down in the middle please help??

[praveenbv]

HI@Siddhartha1106,

Welcome to the HP Support Community.Apologies for all the inconvenience. Request you to follow the below troubleshooting steps

I have a few steps listed below that should help you resolve this concern: 

Unplug the charge and use the laptop until the battery drains to 15%. 

Turn off the laptop and turn it back on after 30mins. 

Reinstalled Microsoft ACPI-Compliant Control Method Battery under device manager: 

1) In the search box, type and open “Device Manager”.  

2) Expand “Batteries”.  

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there.  

4) Click on “Uninstall”.  

5) At the prompt put a check in the box to remove the current driver  

6) Shutdown the computer.  

7) Remove the battery for minute and then put it back in.  

😎 When the computer comes back up it should automatically find the driver.  

9) Go to Device Manager.  

10) Expand Batteries.  

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software"  

Do the same thing with Microsoft ACPI-Compliant Embedded Controller.  

Restart the computer and the issue should be fixed. 

Additional help can be found in the below articles: 

Additional help can be found in the below articles: 

Battery Charging Delayed When Operating Notebook in High Ambient Temperatures 

 Battery Indicator Light Turns On and Off While Battery is Charging 

Let's try this:

Run hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

Hope this helps! Keep me posted for further assistance.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.