05-24-2011 07:37 AM
Hi there. We have a HP5550DN printer in our office which shows 'error 49.4C02' when trying to print some versions of Adobe Acrobat Standard documents. Its not all pdf's just certain ones. The only option at the moment is telling the printer to print as an image but this can be annoying if we have to do it all of the time. Is there an update or driver we can install via an administrator to sort this out.
07-07-2011 01:20 AM
Printer error 49.4c02 may occur due to corrupted print queue.
Just clear the queue and restart the printer and the error may be fixed.
This would seem to work for most cases. If none of them are corrupted, check to see if any of them are in an uncommon size.
Larger printings tend to result in this error as well.
Check if it’s the cause by clearing the queue then printing normal-sized documents instead.
The error may also be caused due to complicated fonts as they are harder to read, especially if they’re in color or written in a pdf format.
If this is the cause of the error you can either stop printing such documents and update the drivers or firmware.
The drivers may contain bugs which cause the printers to act this way, so updating them will solve the problem.
07-08-2011 06:13 AM
One other suggestion you may try:
Under the Adobe Reader Print dialog, Press the "advanced" button and mark the "Print as Image" option.
Than check for any change.
If my post resolve your problem please mark it as an Accepted Solution
05-22-2013 05:24 AM
I am receiving same error on one of our HP N/W printers. Last time when this error occured, one of my colleague tried to print a pdf file with high graphics and as soon as cancelled the job from her system, restarted the printer; the issue got resolved. Now somebody else has printed a similar document in our N/W and I can't identify, who?
I need to cancel the job queued on the printer and I have no clue from what machine is it. Can I cancel the jobs from the printer itself?
I tried to restart the printer to see If that cancels the job but no luck.
05-20-2015 01:03 PM - edited 05-20-2015 01:04 PM
Heres how i fix my error 49.4c02. I only get the error if i am connected to the network via ethernet otherwise it works fine, but as soon as i connect to ethernet it gets the error.
Things i did that didn't work
Clear all the print queue
change the IP address
change the NIC card to a new one
reboot 10x times
Thing I did that fix my issue
Remove the printer from "Printer and faxes" on the PRINT SERVER and Reinstall the printer.
I just want to put this out there in case someone has the same issue
- Using HP Diagnostic Tools for HP Printers in Windows
- Printer Problems after Upgrading to Windows 10
- Print Jobs Stuck in Print Queue (Windows)
- Resolving 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error
- 'Offline' Printer Status Message Displays (Windows 10)