02-09-2012 03:06 PM
I get an error message that says the "Following ink cartridge appears to be missing or damaged" The ink cartridges are all brand new. I believe the printer thinks they are missing. I followed the directions for the message "Following Print heads appear to be missing or damaged" but that did not fix the problem. Any ideas?
02-13-2012 03:30 PM - last edited on 04-18-2016 04:20 PM by OscarFuentes
I linked a document below that covers this exact problem. I am not sure if this is the same document you have tried.
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem
07-31-2012 10:06 AM
Same issue here.
Picked up the hardly used printer so I bought the power cable(was missing) and now 4 new cartridges (which is not cheap) and this thing is dead.
I know HP monitord these threads so shame on them for not offering a better fix or replacement for such a defective unit. They stick with the "Warranty is out, sorry, but you can buy another..." and that is just not right!!!
I have tried all possible fixes and I checked all connections. Cant update firmware as it's stuck in the error screen.
Time for a class action suit?
07-24-2014 10:38 AM
I did everything listed and to no avail my printer wouldn't work. I then noticed the contact for the black ink was not out like the rest (the plastic piece that makes electronic contact with cartridge). While inserting the cartridge it popped the piece out of position which is why it would register.
I used pliers and carefully pulled the piece out, adjusted it so the contact was facing correct side and popped back into place. When I went to reinstall the same cartridge I could feel that it wasn't lining up. Just put in slowly and thank goodness problem solved!!!
Hope this helps at least one person here!!