Forgotten Admin password NEEDED for F10 BIOS change at start-up

[ImHoho]

      I have a      HP G62-229NR Notebook running Windows 7 Home premium      that I have forgotten the ADMIN password and can NOT get into the BIOS set-up, this was my wifes computer, and I lost her two years ago, I keep using this computer because it makes me feel comfy, like she's here with me.  I sure hope some one knows a way to retrieve, re-set, change the password, so I can continue using this computer. Thank you for any and all ideas.

[GBL84]

Please enter the incorrect password 3 times and reply to this post with an error code or the halt code, so I can reset the password for you

Or

Please click on the below shown link to reset the password by yourself using the error code or the halt code

http://bios-pw.org/

Steps to be followed after you reset the password:

1. Use the unlock code posted above to enter the BIOS
2. Disable all passwords that are enabled
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.
6. Then leave the BIOS by saving & exit option to save the changes.

Troubleshooting Steps:

Incase if the Password doesn’t work please try a Hard Reset as follows.

1. Shut down the notebook
2. Unplug the AC Adapter and then remove the battery
3. Hold  down the Power button for 30 seconds
4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
5. If you now see a password box, Please type the same Password I shared before and press enter

Hope this helps, for any further queries reply to the post and feel free to join us again

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Thank You,

GBL84

Although I am an HP employee, I am speaking for myself and not for HP

[ImHoho]

I did as you told me too, 3 times got :    KEY:93412552      I pray this works, I guess I'm just waitng for you to get back, thank you

[ImHoho · Accepted solution]

ok, have the new code going in to try it, will let you know when
I'm done

GBL84,

     Man that was soooooo smooth, it was like ice off a glass door knob, lol.   No problems, no hic-cups, no errors, it was like I really knew what I was doing, lol, and we all know I do, it's my story.  and I I take my hat off to you SIR, I am in debted to you,  you have my gratitude, Thank You very much kind sir, I will look for you should I have any other issues.

            Thanks again,

                                           ImHoho

[GBL84]

@ ImHoho 

You are very welcome.

 Wish you all the best.

Thank You,

GBL84

Although I am an HP employee, I am speaking for myself and not for HP