sound driver problem

[oooooo]

i have changed my operiting system from vista 32bit to xp pro sp3 32bit

i downloaded the drivers for xp from here..

everything work okay....except the sound driver...when i install it..it works ok

but when i restart the computer..audio not working..please can anyone tell me how

to resolve this problem?i want the sound to work normally always..

waiting for replay

[alatimedia]

what system are you using? what is the service number? Look for this information on back of your computer

[oooooo]

i am using windows xp proffisional sp3 32bit

and the service number for my notebook is hp pavilion dv4 1106em

[alatimedia]

try this

and

also try windows update

[Daniel_Potyrala]

Hi,

MS-UAA for SP3 (required with a reboot before Audio, Modem and Graphic driver) here

Please check first this link written by Joshua Wood and concentrate in it on problems that may appear when You will be installing sound card. I know then this is guide for dv5 but many hardware and drivers are the same for both models.

IDT High-Definition Audio CODEC Driver,

1. sp41698, vista driver, reported work in XP here

2. sp41693, vista driver, reported work in XP here

3. sp39671, vista driver, reported works in XP here or here

4. If You still have old folder C:\Swsetup from Vista somewhere then audio drivers from there may also work for You.

When You will install any audio driver with success check is Your sound working.

If there will be no sound after restart check this thread. There are informations how to solve this.

High-Definition Audio (HDA) Modem Installer and Driver here

[oooooo]

(If there will be no sound after restart check this thread. There are informations how to solve this.)

1. Download devcon command line utility, here (done)

2. Extract and copy the file to c:\windows\devcon\i386\devcon.exe (done)

3. Place idt.bat in c:\Documents and Settings\All Users\Start Menu\Programs\Startup (done)

but the problem is : what is "PCI\VEN_8086&DEV_293E&SUBSYS_3607103C&REV_03" ?

and what i should do with it ? i mean how i can Make command line ? because it is not working after restart..

the sound still not working after restart.

waiting for replay....thnx

Message Edited by oooooo on 09-18-2009 03:10 PM

[Daniel_Potyrala]

How to find it?

Go to Control Panel -> System -> Hardware -> Devices Manager

Click with right button of Your mouse on MS-UAA and choose properties. Then go to bottom details and paste here device id.

Below You've got example how to do it:

You must change it only in this situation when devcon is not working and MS-UAA have other device id.

When You will find this different id put it in this file idt.bat instead of this which is there now.

[oooooo · Accepted solution]

thank you so much.....you have resolved my problem...

thnx again...