cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
Level 3
43 32 2 3
Message 1 of 2
197
Flag Post
HP Recommended

HP 705 G4 has 192.168.0.10 as IP address while turned off

HP 705 G4
Microsoft Windows 10 (64-bit)

Hello,

we have several HP 705 G4 mini and recently after a power blackout, we encountered an issue with an IP address conflict.

192.168.0.10 is the IP address from our new exchange server and after the blackout, we had trouble with this IP address. After some troubleshooting we figured out, that the IP address is coming from one of the HP 705 G4 computers. However, the computer was powered off. 

So we unplugged the network cable and solved the problem, but then 192.168.0.10 was coming from the next HP 705 G4. Therefore, we unplugged all our HP 705 G4 and then the Exchange server was working, finally. 

We are still having the problem after rebooting the Exchange Server. Only if any HP 705 G4 is powered off during that time.

 

We figured out, if the IP 192.168.0.10 is available and the HP 705 G4 is powered off during that moment, than the network card will take the IP address.

We are using the BIOS from March 02.10.02 Rev.A and we are still having the problem.

 

If you want to try, if you also have the problem:

- Directly connect your computer or laptop to any HP 705 G4 which has no power (unplug the power cord)

- Give yourself 192.168.0.50/24 as IP address

- Plug in the power cord from the HP 705 G4

- Try to ping 192.168.0.10

 

Has anyone encountered this problem? We don’t have any fix from HP yet. We will probably end up separating our server and client network...

1 REPLY 1
Highlighted
Level 3
43 32 2 3
Message 2 of 2
122
Flag Post
HP Recommended

HP 705 G4 has 192.168.0.10 as IP address while turned off

It helps, if we disable WoLAN. If WoLAN is disabled and we shut down the client nothing happens anymore.

But if we unplug the power cord and plug it back in, then the Client has again 192.168.0.10 as IP address, as long as the Client is powered off.

Immediately when we press the power button the Client starts booting into Windows and the IP address disappears.

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation