-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
7
0
1
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Welcome to HP Support Forums. 🙂 I came across you post and would like to help.
I understand that you would like to know what is the maximum resolution supported by the DVI connector with the Intel HD 4600 graphics. You would like to connect a monitor with 2560 x 1440 resolution and would like to know if your PC has a single or dual link DVI output.
I did some research and found the motherboard specifications of your HP ENVY 700-215xt Desktop PC. You may view the motherboard specifications by clicking here. The I/O Ports and internal connectors image shows that your PC has a Dual Link DVI-D connector as shown in the below image:
#5 = DVI-D
Upon further research, I found that the dual-link’s maximum supported resolution is 2560×1600 (at a refresh rate of 60Hz you can get a resolution of 2560×1600).
I hope this helps. Please keep me posted for any further questions. Cheers! 🙂
HP Recommended
Welcome to HP Support Forums. 🙂 I came across you post and would like to help.
I understand that you would like to know what is the maximum resolution supported by the DVI connector with the Intel HD 4600 graphics. You would like to connect a monitor with 2560 x 1440 resolution and would like to know if your PC has a single or dual link DVI output.
I did some research and found the motherboard specifications of your HP ENVY 700-215xt Desktop PC. You may view the motherboard specifications by clicking here. The I/O Ports and internal connectors image shows that your PC has a Dual Link DVI-D connector as shown in the below image:
#5 = DVI-D
Upon further research, I found that the dual-link’s maximum supported resolution is 2560×1600 (at a refresh rate of 60Hz you can get a resolution of 2560×1600).
I hope this helps. Please keep me posted for any further questions. Cheers! 🙂
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community