-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Boot and Lockup
- Bios pass lost

Create an account on the HP Community to personalize your profile and ask a question
11-29-2016 10:16 AM
Thanks
Solved! Go to Solution.
Accepted Solutions
11-29-2016 10:19 AM - edited 11-29-2016 10:23 AM
Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.
http://welcome.hp.com/country/w1/en/contact_us.html
When talking to the HP rep ask them to escalate your service request.
Or download these files.
https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?dl=0
Insert clean USB flash drive.
Then run USB Image tool.
Choose the flash drive then click on RESTORE.
After restore remove flash drive.
Insert flash drive into locked laptop and boot. ”If an HDD is installed remove before booting.”
At C:\OUTPUT type CD.. “Then hit enter”
Type HPBR “Then hit enter”
First thing is to save your settings.
Select #3 re-program.
Press “S” to save system information.
Type HPBR and hit enter.
Select “FIRST RUN”
Then select model.
After reboot repeat same as above but this time SELECT “SECOND RUN”
If you cannot boot from USB flash drive use the Image tool to build a HDD.
Then use the drive to boot the program on the locked laptop.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
11-29-2016 10:19 AM - edited 11-29-2016 10:23 AM
Contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.
http://welcome.hp.com/country/w1/en/contact_us.html
When talking to the HP rep ask them to escalate your service request.
Or download these files.
https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?dl=0
Insert clean USB flash drive.
Then run USB Image tool.
Choose the flash drive then click on RESTORE.
After restore remove flash drive.
Insert flash drive into locked laptop and boot. ”If an HDD is installed remove before booting.”
At C:\OUTPUT type CD.. “Then hit enter”
Type HPBR “Then hit enter”
First thing is to save your settings.
Select #3 re-program.
Press “S” to save system information.
Type HPBR and hit enter.
Select “FIRST RUN”
Then select model.
After reboot repeat same as above but this time SELECT “SECOND RUN”
If you cannot boot from USB flash drive use the Image tool to build a HDD.
Then use the drive to boot the program on the locked laptop.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.