-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
1
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
See the following video list for removal and replacement of the hard disk. ( hard drive assembly)
http://h20574.www2.hp.com/results.htm?SID=10862166&MEID=9E11075D-744F-4986-ACA1-547A14CA1B03
What you will need is a SATA mobile 2.5" SSD to replace the legacy spinner hard wisk with. I highly recommend that you replace it by cloning the current disk to the new one. That is the simplest method. See the sticky I created in this section of the forum for details on how that is done.
An SSD of 256 GB or higher capacity is recommended as a replacement for the legacy hard disk currently installed. An SSD of 256 GB or higher capacity will allow for use of the Recovery media that you created with the HP Recovery Media Creator utility.
See the following links at NewEgg.com to see what will work. You can only use SATA, SATAII and SATAIII interface SSD disks. None of the other interface types are compatible with your notebook's systemboard and BIOS !!!
http://www.newegg.com/Internal-SSDs/SubCategory/ID-636?Tid=11693
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
HP Recommended
See the following video list for removal and replacement of the hard disk. ( hard drive assembly)
http://h20574.www2.hp.com/results.htm?SID=10862166&MEID=9E11075D-744F-4986-ACA1-547A14CA1B03
What you will need is a SATA mobile 2.5" SSD to replace the legacy spinner hard wisk with. I highly recommend that you replace it by cloning the current disk to the new one. That is the simplest method. See the sticky I created in this section of the forum for details on how that is done.
An SSD of 256 GB or higher capacity is recommended as a replacement for the legacy hard disk currently installed. An SSD of 256 GB or higher capacity will allow for use of the Recovery media that you created with the HP Recovery Media Creator utility.
See the following links at NewEgg.com to see what will work. You can only use SATA, SATAII and SATAIII interface SSD disks. None of the other interface types are compatible with your notebook's systemboard and BIOS !!!
http://www.newegg.com/Internal-SSDs/SubCategory/ID-636?Tid=11693
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community