Laserjet Pro FMP M277dw - PIN requirement on scan to email

[Mike_W1]

Is there a way to disable the PIN requirement when scanning to email.  Three of us are on a wireless network. We scan our work to our individual email addresses.  We don't want to use a network folder.  It's a pain keying in the pin everytime we scan.  Thanks everyone.  Mike

[Sizzlingsum_13 · Accepted solution]

Hello@Mike_W1

Thanks for taking an interest in the HP Support Forums. I see that you need assistance on disabling the PIN while scan to email. I would like to help you out with this issue today.

Here's a related post that seems to have helped others: http://hp.care/2iDAQVh

Once you try these suggestions, please report back.

I'll be eagerly waiting to assist you with same, cheers 🙂

If this helps, please mark this as “Accepted Solution” as it will help several others with the same issue to get it resolved without hassles.To simply say thanks, please click the "Thumbs Up" button to give me a Kudos to appreciate my efforts to help.

[Mike_W1]

There was no need to create a new email profile.  Open the "scan to email" wizard and clck on "edit" to change the profile. As stated just leave the PIN blank as you click through to finish.  You will need to re-enter your email password. Thank you Sizzlingsum_13 HP Support Agent

[Sizzlingsum_13]

@Mike_W1

I thank you for the reply.

Glad that the issue got fixed. You can reach out to HP forum for any issues on your HP products.

Have a nice day, cheers 🙂

If this helps, please mark this as “Accepted Solution” as it will help several others with the same issue to get it resolved without hassles.To simply say thanks, please click the "Thumbs Up" button to give me a Kudos to appreciate my efforts to help.