• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Note: From May 1, 2024, the HP Scan and Capture app will no longer be available (retired) in the Microsoft Store and HP will not release any further app updates. Alternatively, you can download HP Smart from the Microsoft Store. For more information on how to set up your printer using the HP Smart app, go to HP printer setup (HP Smart app).
Common problems HP Solution Center not working : Adobe Flash Player Error and Unable to scan
We would like to share some of the most frequently asked questions about HP Solution Center not working : Adobe Flash Player Error and Unable to Scan.
HP Recommended
HP Officejet Pro 8620

The screen on my printer that let's you choose to fax, copy, scan, etc will not light up, but the printer is on and will print something off the computer. 

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hey there! @CountyRds, Thanks for stopping by the HP Support Forums! 

 

I understand the printer control panel on your printer will not turn on.

 

Don't worry I'll to help you out.

 

Did you make any changes to your printer?

 

Try the steps recommended below.

 

Turn on the printer.
Wait until the printer is idle and silent before you continue.
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.
Remove the ink cartridges from the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
Wait at least 60 seconds.
Plug the power cord back into the wall outlet.
   NOTE:
HP recommends connecting the printer power cord directly to a wall outlet.
Reconnect the power cord to the rear of the printer.
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Reinsert the ink cartridges, and then close the ink cartridge access door.
If you receive a prompt to print a calibration page, do so.
If you disconnected the USB cable, reconnect it to the rear of the printer.
Try to print.

 

Also, try updating the printer firmware and check if it helps.

 

Link to update the printer firmware.

 

If the issue still persists after trying out the steps.

 

It is a hardware issue with your printer.

 

Please contact HP support for service options.

 

Link to contact HP.

 


Let me know if this helps! 
Have a pleasant day ahead! 🙂

 

Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    
Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
 

A4Apollo
I am an HP Employee

View solution in original post

1 REPLY 1
HP Recommended

Hey there! @CountyRds, Thanks for stopping by the HP Support Forums! 

 

I understand the printer control panel on your printer will not turn on.

 

Don't worry I'll to help you out.

 

Did you make any changes to your printer?

 

Try the steps recommended below.

 

Turn on the printer.
Wait until the printer is idle and silent before you continue.
Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.
Remove the ink cartridges from the printer.
With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
Wait at least 60 seconds.
Plug the power cord back into the wall outlet.
   NOTE:
HP recommends connecting the printer power cord directly to a wall outlet.
Reconnect the power cord to the rear of the printer.
Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Reinsert the ink cartridges, and then close the ink cartridge access door.
If you receive a prompt to print a calibration page, do so.
If you disconnected the USB cable, reconnect it to the rear of the printer.
Try to print.

 

Also, try updating the printer firmware and check if it helps.

 

Link to update the printer firmware.

 

If the issue still persists after trying out the steps.

 

It is a hardware issue with your printer.

 

Please contact HP support for service options.

 

Link to contact HP.

 


Let me know if this helps! 
Have a pleasant day ahead! 🙂

 

Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    
Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!
 

A4Apollo
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.