OJ5200 Software re-install fails

[AnneGh]

OJ 5258 failed to print - attempted to reinstall drivers unsuccessfully. Ran P&S Doctor, removed drivers, ran troubleshooter with selective startup, etc. - still get message "failed to install" when attempting to install  OJ5200_Full_Webpack44.4.2678. HP Support Assistant can connect and recognizes printer.

[Betty0610]

@AnneGh

Welcome to the HP Support Community.

Let's try to do a root uninstall and reinstall of the software:

Unplug any USB cable, if any, before doing this.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s")

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Open up the run command with the "Windows key + R" key combo

14.) Type c:/programdata and click Ok. Go to Hewlett Packard folder, remove any printer related folders & files.

15.) Restart the computer. 

Once done, please download and install the software from here: 

https://support.hp.com/in-en/drivers

If the issue persists:

Create a TCP IP port

1. Print a Configuration Page to get the printer's IPv4 address (you can also tap on the wireless icon on the front panel of your Printer to get the IP address)

2. On your PC, go to Control Panel, from Devices and Printers, right-click the printer and left-click Printer Properties, select the Ports tab.

3. Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.

4. Type in the proper IP address for the printer.

This video resource will show you how to do it:

Create & Use TCP IP port

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day! 

[langr]

All of the steps up to "create new TCPIP port" have been performed. I have not tried to create a new port as the problem is with the install/uninstall error for the driver software (please refer to the original message). HP Smart "sees" the printer just fine, but reports no driver installed... It would be nice if HP had a driver removal tool. The procedure provided has not been successful in resolving the problem.

[Betty0610]

I would suggest you try the Windows built-in drivers. Follow the steps below:

•    Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.

•    When the page prompts for the drivers, select "Windows update". The driver list will be updated.

•    Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.

Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

Thanks!