cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
MeaganP
New member
1 0 0 0
Message 1 of 3
453
Flag Post

Yellow does not look yellow at all

HP Recommended
DesignJet Z5200
Microsoft Windows 7 (64-bit)

We have a DesignJet Z5200 printer and when we first got it, the yellow ink actually looked yellow when printed. Now when we print something with the color yellow, it comes out orange. The yellow cartridge is still 75% full. There are no error messages. Also green is not printing correctly either. The ink is very expensive. Do we need a new cartridge? Or is there a setting that can be changed? Thank you in advance!

2 REPLIES 2
rasheddul
Level 7
634 609 35 85
Message 2 of 3
Flag Post
HP Recommended

Please perform printhead clean and complete printheads alignment and print image diagnostic print page.... If there have color printing is OK....while print any job.... Please Goto printer properties and Goto color then select application manage by color.... Then print and check....

 

If diagnostic image color not good... Please replace printhead on required faulty one. .. 

I hope problem will solved

Regards
Rashed

Regards/Rashed
https://www.linkedin.com/in/rasheddul
Was this reply helpful? Yes No
poppy0226
Level 1
7 2 0 1
Message 3 of 3
Flag Post
HP Recommended

Did you test with the internal photo image? I had a similar problem with other colors and replaced with new HP printheads. That cleared up the issue. 

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation