ATA / VoIP Adapters

zoom is changing their ciphers on 29th of sept..will this cardPolycom SoundStructure , TEL1 Plug-in Card, Telephony...

Reposting back to the correct category since HP has mis-categorized all OBI 1xxx and 2xxx phones as ATA adapters. P...

• OBi2182

Hello,On my OBi2182 phone, about 5 seconds after it finishes booting up, an icon pops up in the upper right that is...

• OBi2182

Hello! I am attempting to set up an OBi300 to configure an ITSP profile. However, when logging in as admin, I do no...

I am running a project to replace legacy phone systems with sips phones. Some users, with analogue handheld phones ...

How do I go from this unit to my overhead paging amp? I cant tell what the output is. I see cat5 in and I have a US...

I installed about 20 OBi302's using RingCentral, they are connected to Viking Door Intercoms, using DigitMap and Ou...

We are using an Obi 312 for the FXO Port and need to be able to do 2-stage dialing when calling out over the PSTN. ...

I have a OBi302 device following these instructions for setup.https://support.telnyx.com/en/articles/5820183-plantr...

Both send and receive call volume is too low. I have difficulty hearing callers and vice-versa even with the phone ...

While changing the OBi302's default password, I also changed the username. Now, when I try to sign in with the cust...

Good morning,This morning we are going live with RingCentral. We're switching everything over, including our dial-u...

It appears that trunks are broken in the 3.2.3 firmware. Attempting to configure a trunk, even with a single disabl...

i currently have obi 202 with google voiceon all ports.willthese models support google voice on all ports?

Which key management protocol does the OBi300 use in implementing SRTP?My ITSP somehow finds itself unable to trans...

We are trying to install our Obi300 for the first time. Every icon is green except for the phone icon that is alway...

I have an Obi300 ATA set for paging only, however the device is stuck on-hook. We have another device with the same...

Does the file on the Obi300 support page also contain Obi200 firmware? The way it's bundled together on the obitalk...

Does OBI300 supports integration with Ribbon "Sonus" SBC, the customer has SBC integrated with SFB on prem and look...

I am looking for configuration guidance on configuring the Obi312, Obi504, or Obi508 as a PSTN failover gateway. I ...

yeah, I'm not impressed with the eloqua forms failing so this is my last attempt to spend money on an ATA.I would l...

Hello and welcome to the Poly Community VoIP Forum Please take a moment to familiarize yourself with theCommunity ...