cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
1 0 0 0
Message 1 of 2
128
Flag Post
HP Recommended

HP Screen immediately goes to sleep, says no signal. Display is properly attached, pc is powered on

UP Envy Desktop 750-114
Microsoft Windows 10 (64-bit)

Hp video display will not see HP pc. Monitor goes to sleep. Monitor is correctly connected and powered on. Pc is powered on and correctly connected, but display still goes to sleep immediately.

 

Your assistance is appreciated. Thank you for your time.

DJ

1 REPLY 1
Highlighted
Level 12
Level 12
6,006 5,992 565 1,264
Message 2 of 2
104
Flag Post
HP Recommended

HP Screen immediately goes to sleep, says no signal. Display is properly attached, pc is powered on

Greetings wqhihi95,

 

This fix could be something simple such as trying a different data cable with the existing monitor. Or try a different monitor, if possible. Or try the existing monitor on a different PC.

 

You may have a PC problem if the monitor is working correctly. Or connecting a different, known good, monitor yields the same negative results.

 

Tap "ESC" at system start to see if you can get to the HP Startup Menu.

 

Check the power supply LED at the back of the PC, it should be solid green.

 

What do you hear and see? Any startup sounds such as disks spinning, LED activity on the PC or the motherboard, any fans spinning up or any optical drive activity.

 

You will have to systemically troubleshoot each motherboard component, the motherboard, or the power supply to find the source of the problem.

 

Regards

 

 

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation