The HP Community is here for you.
11-11-2013 01:35 PM
Hello, I hope some-one can help.
I have recently installed a new HP Envy 5532 e onto my home network. Installation was fine and we were able to scan and print successfully.
Both my PCs are now receivin error message 'Scan to computer no longer active'. This appears upon boot but also remains and we are no able to print. The PC names are no longer visibleon the printer screen. However we can still print.
The configuration is as follows:
PC 1 is Windows XP SP3, runinng Norton Internet Security.
PC 2 is Windows 7 Home running Norton Internet Security,
Both PCs are up to date with Windows updates.
Both PCs have the 'Scan to Computer' option set to enabled and to activate automatically upon PC startup.
Printer is wirelessly connected to the network.
I have checkd the IP address of the printer and this is unchanged since installation.
I have tempoarily switched Norton Firewall Security off to look for port conflicts but to no avail.
The HP print and Scan Doctor fails at the Twain test and advises me to reboot the computer and restart the test. It appears unable to find the scanner.
As we can still print, I do not understand why we cannot scan.
I am confused as we were able to print and scan when we initially installed the software.
I would be grateful for any assistance from the community.
Thank you in advance.
11-11-2013 03:40 PM
Hello, sounds like the connection between the printer and router are having issues, have you tried power cycling your wireless router? I would see if that might change anything first, also do you have many devices connected via wireless? Not much of a solution but hope this helps some....
11-12-2013 11:52 AM
I've downloaded the latest driver from the driver site. Uninstalled the old and installed the web version.
Installation went fine, scan test was successful.
Next day the error returned.
11-12-2013 11:54 AM
I had done a full cycle of the router. Good point about the devices. I have checked the IP addresses and there are no duplicates. Thanks anyway.
11-12-2013 12:31 PM
Hello, sorry to hear you are still having the issue. I have a suggestion, is it possible to connect the printer directly into a laptop not on the network? The reason I am suggesting this is that since you installed/tested and it worked briefly, I am wondering if it is something on the network, plus this way we can narrow it down to the printer or something on the network. Because, in my opinion, it seems something on the network is not allowing the printer to scan. I have seen on the 4540 mfp where it is scanning fine but will just randomly not allow access to scan to folder. I look forward to your findings.