cancel
Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
Tiasteis
New member
2 0 0 0
Message 1 of 2
187
Flag Post

Is it possible to print a longer paper?

HP Recommended
Desingjet Z2100 Photo

Hi,

 

is it anyway possible to print a longer piece of paper? I work with building-constructions and dosen't get the whole paint in 1 print and then have to tape 2 pieces together, can I print 1 long paper instead? and how? (It's a long paperroll) 

 

Tias.

1 REPLY 1
jasonmiamifl
Level 7
880 810 37 84
Message 2 of 2
Flag Post
HP Recommended

get a roll of paper & print it in portrait mode. the longest I ever printer wa 24" x 35 feet.....

 

on print setting, use portait/vertical mode .

 

for example, for 24" roll media & you want to print 50" long. so with custom paper :

24" wide

50 feet long.

 

apply same to other width, 36" 42" etc. but if paper size is shorter & use    landscape  mode.

 

for example, if roll is 42" wide & image is only 40" x24" 

 

so in custom mode, enter   42"   wide     25" high....   landscape  mode....   leave some space is better. myself always

leave one inch for margin, also stretch for canvas.

 

press press    print...    make sure check   image in print box & it should fit within box... or wrong & recheck all.

 

These are the most basics & everyone whoever  use large format printers , no matter what brand printers ,

must know. also image types, icc profiles etc etc.

 

Good luck.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation