Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
2 0 0 0
Message 1 of 2
Flag Post

Plotter Does Not Initialize

HP Recommended
Hp DesignJet T520

Good afternoon, my dear, Please, I urgently need your help!


I have a Hp DesignJet T520 plotter that suddenly stopped working. That is, when I call it it does not boot completely and gives 3 beeps (two short and one long). Initialization ends with the choice of language selection and you can not do anything to choose the type of language you want because the digital one also stopped working. The plotter is completely out of action and I do not know what else to do.


Can you please help me?

Level 7
634 609 35 85
Message 2 of 2
Flag Post
HP Recommended

Hi,  Thanks for contact with HP Support Forum.


Please confirm right now what is the status of this printer.


If its continue to make 3 beeps, you need to replace new Main PCA.



Open the Left site cover and reconnect the all internal cable, after that check it. If continue, please replaced.



If it is coverd under warranty, please contact with your nearest HP Partner/Service Centre for warranty or new Main PCA purchase issue.



I hope that answers will support to concern adequately. Let me know! Good luck 

Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!



Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation