Showing results for 
Search instead for 
Did you mean: 
Get help with Large Format Printers, with direct access to all Latex Knowledge Center · Ask anything · Find anything · Share anything at HP LKC
New member
1 0 0 0
Message 1 of 4
Flag Post

Z2100 does not go above 0% on initialisation, error 08:11

HP Recommended

Does not go above 0% on initialisation, error 08:11.

Restarted repeatedly, reseated cartridges and interface card. Can not work out how to get to print heads to reseat these.

Printer had been powered down for considerable time, so could data have been lost if back up button cells died?

Tags (1)
Level 3
60 60 1 14
Message 2 of 4
Flag Post
HP Recommended

Check out do you have HDD on formatter?

Also, check out RTC battery (button battery) on formatter board. If its dead, replace it.

Was this reply helpful? Yes No
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Вопрос по этой же тематике . Имееться плотер z2100 модель q6677d. на одном из обьектов не отдали мне hhd от плотера . Подключаю от ноутбука и выходит ошибка 08:11, что делать?

Was this reply helpful? Yes No
20,511 15,611 325 972
Message 4 of 4
Flag Post
HP Recommended


Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you

I work on behalf of HP
Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation