cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 1 0 0
Message 1 of 4
192
Flag Post
HP Recommended

Blue Screen error code BA7E730C

ThinkCentre
Microsoft Windows 7 (64-bit)

Hi All,

 

I have a blue screen error message BA7E730C at startup and can not track down what this may be?

 

Does anybody have any ideas? The printer refused to turn off so I did hold down power button while inserting the power cord trick which seems to have worked but I am stuck with the error code.

 

Many thanks,

 

Steve

3 REPLIES 3
Highlighted
New member
2 1 0 0
Message 2 of 4
190
Flag Post
HP Recommended

Blue Screen error code BA7E730C

Sorry, me dumb. I forgot to say that the printer is a HP DesignJet T120

0 Kudos
New member
1 1 0 0
Message 3 of 4
172
Flag Post
HP Recommended

Blue Screen error code BA7E730C

Today   02.10. 2018   my plotter stopp. I get the code :B3B73534

0 Kudos
Highlighted
Level 7
634 618 35 77
Message 4 of 4
125
Flag Post
HP Recommended

Blue Screen error code BA7E730C

If any body face the below related proble of HP designJet T120/t520 printer relted, you must follow the below process:

 

original (2).jpg

 

At first try to follow the below steps and get it fix by :

- Connecting the printer to another outlet

- Repacing the power cable

- Replacing the Main PCA (If you have replace Main PCA, it will solved the issue.)

 

Also try to Isolate the printer by removing any connectivity cables, printhead

 

Try removing the ink cartridges, printhead, paper, replacing the power cable and another power outlet. If you still have the problem, please replace the Main PCA (P/N: CQ890-67097)

 

PartSurfer: http://partsurfer.hp.com/Search.aspx?SearchText=CQ890-67081

 

Part Store: https://parts.hp.com/hpparts/Default.aspx?mscssid=

 

original (1).jpgoriginal.jpg

 

N.B: Part No. CQ890-67081 is an older revision.

 

Main PCA - T120: P/N: CQ891-67013

Main PCA - T520: CQ890-67023 

 

 

Most of cases that kit will damage for voltage factualation and this one working as a ROM. 

 

 

 

It is my understanding that the new Main PCA should come with the USB with the FW. Make sure it is there before installing the new main PCA.


If problems with the FW, will not recommend you to use the old USB with the firmware again.

 

If not covered under warranty you may replace Encrypted chip which is failed on the mainboard inside the printer you can buy it on ebay/other's source:

 

http://www.ebay.co.uk/itm/282081139582?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip-/282385654102

 

http://www.ebay.co.uk/itm/282153834889

 

 

I hope that answers will support to concern adequately. Let me know! Good luck 


Please click "Accepted as Solution" on the post that solves your issue to help others find the solution. To show appreciation for my help, please click the "Thumbs Up Icon" below!

 

Thanks,
Rashed

Regards/Rashed
https://www.linkedin.com/in/rasheddul
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation