cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
2 0 0 0
Message 1 of 4
958
Flag Post
HP Recommended

M.2. NVME SSD not recognised in BIOS boot option

HP Omen
Microsoft Windows 10 (64-bit)

I have installed a WD Black NVME SSD into my HP Omen successfully, cloned the HDD to it, formated the HDD, and everything is fine Window's wise.

 

However, every time I restart my laptop it goes to "fixing PC" because it is trying to boot from the HDD. I have to manually press F9 and boot it from the SSD every single time.

 

In BIOS options on the boot menu, my SSD isn't listed at all, just "Windows boot". This is driving me nuts and I cannot think about what to do.

 

Any help would be greatly appreciated.

3 REPLIES 3
Highlighted
Level 15
Level 15
22,461 22,116 2,552 8,575
Message 2 of 4
925
Flag Post
HP Recommended

M.2. NVME SSD not recognised in BIOS boot option

@Lixhul, welcome to the forum.

 

What is the model or product number of the computer?  Please don't furnish the Serial # or other personal information.


Signature:

HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)

Custom build: Corsair 750D Airflow (Full Tower); MSI MEG z390 ACE; i9-9900K processor (OC'd 5.025); Corsair H150i cooler; Corsair Vengeance Pro 3200 memory ( 32 GB ); MSI RTX 2080 Gaming X Trio video card; Samsung 970 Pro 512 GB; Samsung 860 EVO 1 TB

HP Spectre 360 Convertible; i7-7560U; 16 GB memory; Intel® Iris™ Plus Graphics 640; 512 GB PCIe® NVMe™ M.2 SSD; 13.3" diagonal 4K UHD UWVA eDP BrightView WLED-backlit multitouch-enabled edge-to-edge glass (3840 x 2160); Windows 10 Pro 64 with Windows Ink

HP Photosmart 7520 AIO


**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**

Intelligence is God given; Wisdom is the sum of our mistakes!

I am not an HP employee.

0 Kudos
Highlighted
Level 12
11,043 11,017 577 1,657
Message 3 of 4
918
Flag Post
HP Recommended

M.2. NVME SSD not recognised in BIOS boot option


@Lixhul wrote:

I have installed a WD Black NVME SSD into my HP Omen successfully, cloned the HDD to it, formated the HDD, and everything is fine Window's wise. However, every time I restart my laptop it goes to "fixing PC" because it is trying to boot from the HDD. I have to manually press F9 and boot it from the SSD every single time.


If you really formatted the HDD (not the SSD), there is nothing left on that disk-drive that needs "fixing".  Correct?

 

If you disconnect the HDD, and boot, does it boot from the SSD ?

 

After you press F9, what choices are displayed?  Which one have you been choosing?

 

Enter BIOS setup, and see if the HDD is still listed as being an eligible boot-device.  If it is, remove that entry, or lower its priority, to become lower than the SSD's priority.


-----------
Welcome to this forum.

Please click the purple/white "Thumbs Up" icon for every response that is helpful.

Also, please click "Accept As Solution" for the best response.

 

0 Kudos
Highlighted
Level 12
11,043 11,017 577 1,657
Message 4 of 4
917
Flag Post
HP Recommended

M.2. NVME SSD not recognised in BIOS boot option

Another note: booting into Windows usually boots into Windows' own "boot-manager", where you may get a menu that offers to boot from several separate installations of Windows.  This is *NOT* the BIOS "boot-selection" menu.

 

 

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation