cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
aebw
Level 1
8 6 0 0
Message 1 of 5
593
Flag Post

The off/on button on the bezel of my HP Pavilion Slimline s5220y

HP Recommended

The off/on button on the bezel of my HP Pavilion Slimline s5220y has a wire which has become disconnected and I can't turn the computer on.  How do I correctly connect the black wire and to what?

4 REPLIES 4
wb2001
Level 15
Level 15
12,842 12,626 1,774 5,022
Message 2 of 5
Flag Post
HP Recommended

@aebw,

The only way to visaulize the connection is to remove the switch.

See here for step-by-step.   Courtesy of @Dunidar back in 2014.

If you can not figure it out, the part # is 511607-ZH1.  

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No
aebw
Author
Level 1
8 6 0 0
Message 3 of 5
Flag Post
HP Recommended

It's not the connection to the switch itself that is loose, it is the end that plugs into the motherboard or power supply.  Where does that end of the wire go?

Was this reply helpful? Yes No
wb2001
Level 15
Level 15
12,842 12,626 1,774 5,022
Message 4 of 5
Flag Post
HP Recommended

front panel.jpg@aebw,

Does any of this help?  There is no pin 10, and pin 9 is reserved.  What is missing?

 

9pinpower.jpg

This system is feedback driven thru Solution and Kudo flags. It's the only means of knowing if you have been served. Please click Accept as Solution, if your problem is solved. To say THANK YOU, press the "thumbs up symbol" to render a KUDO. You can render both Solution and KUDO..

HP Envy 8 5010 Tablet
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
Printer -- HP OfficeJet Pro 8620 Legal
Custom Asus Z97D, I7-4790k, 16GB RAM, WIN10 Pro 64bit, ZOTAC GTX1080 AMP Extreme 3 fan 8GB RAM, 500GB SSD, Asus PB287 4k monitor, Rosewill Blackhawk case and 750W OCZ PSU.
Was this reply helpful? Yes No
aebw
Author
Level 1
8 6 0 0
Message 5 of 5
Flag Post
HP Recommended

So/  The white 2 hole connector from the on/off button will fit on pins 6 and 8?  I would like for you to turn on your speakers and go to http://myroyalady.com for some free music.  Thanks for your help.

Was this reply helpful? Yes No
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation