Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post
HP Recommended

Hp stream 11 boot loop

Stream 11
Microsoft Windows 8.1 (32-bit)
I recently restored my pc it failed and now I can't boot the computer. Every time I try I get a hp logo and it happens again and again. I have tried pressing f11 it took me to a recovery screen that says your computer has to be repaired and error code 0xc000000f I can't use start up options please somebody help.
Level 10
1,580 1,570 133 306
Message 2 of 2
Flag Post
HP Recommended

Hp stream 11 boot loop

There have been many of these type of boot problems posted for the Stream laptops, below are some possible solutions. 


If you cannot restore from the recovery partition by pressing F11 while powering up, you can restore from a recovery USB by booting it.  If you did not create the recovery USB, it can be ordered from HP. 


If you have Windows 10 installed, you can also download the install image from Microsoft and do a fresh install.  The drivers would need to be reinstalled from the site and all your personal files would be lost of course. 


If you want to attempt to fix the existing Master Boot Record, you can boot from a Windows 8.1 or Windows 10 install USB and run Troubleshoot => Advanced Options and run the BootRec.exe utility from the command prompt like below: 


bootrec /fixMBR
bootrec /Fixboot
bootrec /rebuildBCD


I have not done this myself so the commands above may not be complete.  There are many pages describing this, here are two: repair-master-boot-record-mbr-windows and windows_8-update/windows-8-is-stuck-in-an-automatic-repair-loop


Please let us know whatever procedure works for you.

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation