Num/Caps Lock Blinking, Black Screen

[FireStrike18]

I have a HP Compaq Presario CQ61-410US. It was working fine but then when I was booting it up, the caps lock and num lock lights were blinking. It was blinking in sets of two. When finding what it meant, I learned that it was a BIOS problem. So to fix it, I tried everything I could find.

Power on while pressing Windows+B - Nothing

Power on while pressing Windows+V - Nothing

^sometimes when doing these it would turn back off^

Change CMOS Batt - Nothing

F11 Hard Reset - Nothing

New Ram Cards/HDD - Nothing(I did try booting with no ram cards, but it would just beep at me. Don't know if it would fix it. If it would help, please let me know why it beaps.)

Power on then pressing Esc nonstop - Nothing

One trick i found was to power on the press Windows+B over and over again. When I did that, the caps lock and num lock lights would blink nonstop(like a car warning signal by pressing red triangle). But when i would power off the computer, then power back on, it goes back to blinking twice.

I also noticed that part of my HDD was not connected to any thing. I don't know if that is normal or not.

Please how do i fix this?

[praveenbv]

Hi @FireStrike18,

Welcome to the HP Support Community.  

As this is a hardware issue, I'd suggest you Contact HP in your region regarding the service options for your computer. 

If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile Name, you should see a little blue envelope, please click on it.   

Have a great day!  

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. 

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!